ค้นหา
Filters
Close
Hella Marine SeaHawk XL Dual Colour Floodlights

Get the best of both worlds. Use Hella Marine's SeaHawk XL Dual Colour Floodlights to give two colour options in one.

T-Piece / Manifold

Join 2 or more together to create manifolds. Used individually for Fresh Water Engine Flush Out or For System Antifreeze applications.
ผู้ผลิต: TruDesign

The 1½" Threaded T-Piece features 2x Female threads and 1x Male thread enabling them to be joined together to create manifolds - useful for multiple hose connections to a single Ball Valve & Thru-hull fitting.
The centre female thread is shorter and designed for use with Aquavalve Tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The Plug, or Threaded Connector can also be used in the centre connection.
NOTE: all Aquavalve Tails that are used with the T-Piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads.
The 1½" Male and Female threads at each end are also parallel and are also designed to seal through the use of a suitable sealant or PTFE tape allowing any orientation of the two joined parts. Do not overtighten!

Features:

  • Manufactured from a glass reinforced nylon composite - High strength and light weight
  • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
  • Chemical resistant - Impervious to diesel, petrol and antifouling paints
  • UV resistant - Will not break down with ultraviolet light or discolour from the sun
  • High quality surface finish - Will not discolour with green film as similar bronze fittings do
  • Large operating temperature range - Suitable for all marine environments, from -40°C to +110°C

The 1½" Threaded T-Piece features 2x Female threads and 1x Male thread enabling them to be joined together to create manifolds - useful for multiple hose connections to a single Ball Valve & Thru-hull fitting.
The centre female thread is shorter and designed for use with Aquavalve Tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The Plug, or Threaded Connector can also be used in the centre connection.
NOTE: all Aquavalve Tails that are used with the T-Piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads.
The 1½" Male and Female threads at each end are also parallel and are also designed to seal through the use of a suitable sealant or PTFE tape allowing any orientation of the two joined parts. Do not overtighten!

Features:

  • Manufactured from a glass reinforced nylon composite - High strength and light weight
  • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
  • Chemical resistant - Impervious to diesel, petrol and antifouling paints
  • UV resistant - Will not break down with ultraviolet light or discolour from the sun
  • High quality surface finish - Will not discolour with green film as similar bronze fittings do
  • Large operating temperature range - Suitable for all marine environments, from -40°C to +110°C
รูปภาพของ T-Piece Threaded 1½" BSP M-F-F
T-Piece Threaded 1½" BSP M-F-F
SKU: ITA044338
หมายเลขชิ้นส่วนผู้ผลิต: 90893
฿327.00 รวมภาษี
รายละเอียดผลิตภัณฑ์
ชื่อคุณสมบัติค่าคุณสมบัติ
วัสดุไนล่อน
ประเภทข้อต่อเกลียว BSB