ค้นหา
Filters
Close
Hella Marine SeaHawk XL Dual Colour Floodlights

Get the best of both worlds. Use Hella Marine's SeaHawk XL Dual Colour Floodlights to give two colour options in one.

Load Bearing Collar

Strenghten the load bearing strenght of your thru-hull fittings to be ABYC H27 Standards compliant.
ผู้ผลิต: TruDesign

LOAD BEARING COLLARS - ABYC H-27 RATED

TruDesign Load Bearing Collars are designed for use with TruDesign Skin Fittings and Ball Valves. A Load
Bearing Collar will allow an assembly of a Skin Fitting - Ball Valve - Tail to withstand a 500 lb. (227 kg) load
applied to the Tail (inboard end), for a minimum of 30 seconds - complying with North American ABYC H-27
standards. Compliance to this standard is mandatory for all vessels sold into the United States.

Technical:

  • The below table shows the minimum and maximum thread length allowed to protrude inside the hull for each size skin fitting. This will ensure a snug fit of the collar against the hull. It should be noted that for very thin hulls that a backing plate be added to make the "effective hull thickness" a minimum of 20mm.
  • The Skin Fitting can be shortened by cutting with a hacksaw. Measure the thread length from the top of the Skin Fitting Nut as pictured below. Then dry fit to ensure a snug fit against hull or backing plate.
  • Ensure the thread length after cutting falls between the minimum and maximum values. Remove any ragged internal edges with a small file.
  • For additional information on maximum hull thickness for different size skin fitting (Thru Hulls) refer to TruDesign skin fitting information sheet on our web site.
  • If not installed correctly (e.g. if the Skin Fitting thread has not been reduced to a sufficient length) the Collar will be loose and will be able to move up and down the Ball Valve. When installed correctly, the Collar will be snug and not move
  • For skin fitting installation refer to TruDesign Skin Fitting Information Sheet

LOAD BEARING COLLARS - ABYC H-27 RATED

TruDesign Load Bearing Collars are designed for use with TruDesign Skin Fittings and Ball Valves. A Load
Bearing Collar will allow an assembly of a Skin Fitting - Ball Valve - Tail to withstand a 500 lb. (227 kg) load
applied to the Tail (inboard end), for a minimum of 30 seconds - complying with North American ABYC H-27
standards. Compliance to this standard is mandatory for all vessels sold into the United States.

Technical:

  • The below table shows the minimum and maximum thread length allowed to protrude inside the hull for each size skin fitting. This will ensure a snug fit of the collar against the hull. It should be noted that for very thin hulls that a backing plate be added to make the "effective hull thickness" a minimum of 20mm.
  • The Skin Fitting can be shortened by cutting with a hacksaw. Measure the thread length from the top of the Skin Fitting Nut as pictured below. Then dry fit to ensure a snug fit against hull or backing plate.
  • Ensure the thread length after cutting falls between the minimum and maximum values. Remove any ragged internal edges with a small file.
  • For additional information on maximum hull thickness for different size skin fitting (Thru Hulls) refer to TruDesign skin fitting information sheet on our web site.
  • If not installed correctly (e.g. if the Skin Fitting thread has not been reduced to a sufficient length) the Collar will be loose and will be able to move up and down the Ball Valve. When installed correctly, the Collar will be snug and not move
  • For skin fitting installation refer to TruDesign Skin Fitting Information Sheet
รูปภาพของ Load Bearing Collar ABYC Rated - Small (for ½", ¾" & 1" sizes)
Load Bearing Collar ABYC Rated - Small (for ½", ¾" & 1" sizes)
SKU: ITA021402
หมายเลขชิ้นส่วนผู้ผลิต: 90856
฿485.00 รวมภาษี
รูปภาพของ Load Bearing Collar ABYC Rated - Medium (for 1¼" & 1½" sizes)
Load Bearing Collar ABYC Rated - Medium (for 1¼" & 1½" sizes)
SKU: ITA021403
หมายเลขชิ้นส่วนผู้ผลิต: 90857
฿511.00 รวมภาษี
รูปภาพของ Load Bearing Collar ABYC H-27 Rated - Large
Load Bearing Collar ABYC H-27 Rated - Large
SKU: ITA044170
หมายเลขชิ้นส่วนผู้ผลิต: 90920
฿821.00 รวมภาษี
รายละเอียดผลิตภัณฑ์
ชื่อคุณสมบัติค่าคุณสมบัติ
วัสดุไนล่อน