Search
Filters
Close
Hella Marine SeaHawk XL Dual Colour Floodlights

Get the best of both worlds. Use Hella Marine's SeaHawk XL Dual Colour Floodlights to give two colour options in one.

Airmar175 Series Transducers

SS175 series 1kW Chirp-Ready Tilted Element™ Thru-Hull
Manufacturer: Airmar

1 kW

Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles

SS175L Models:

The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The SS175L transducer delivers up to 20 kHz of total bandwidth in just one installation and delivers tremendous deep water performance.

The SS175L transmits across the following bandwidth:

  • Low Frequency 40 to 60 kHz

SS175M Models:

Medium frequency delivers the right combination between coverage under the boat, extended depth range and the ability to produce clean and accurate target and structure returns in the mid to deeper water depths. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths (up to 1500') and delivers ultra-clear target resolution.

The SS175M transmits across the following bandwidth:

  • Medium Frequency 85 kHz to 135 kHz

SS175HW Models

Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.

The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.

The SS175HW transmits across the following bandwidth:

  • High Frequency 150 to 250 kHz

Tilted Elements

Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.

The SS175 range is available in three Tilted Element™ models for each type:

  • Fixed 20° tilted version for 16° to 24° hull deadrise
  • Fixed 12° tilted version for 8° to 15° hull deadrise
  • Fixed 0° tilted version for 0° to 7° hull deadrise

Features:

  • Depth and fast-response water-temperature sensor
  • SS175L:
    • 1 kW power with a maxumum depth of 762m (2500')
    • Low Frequency: 40 kHz to 60 kHz
    • 32° to 21° beamwidth
    • Great deep water performance
  • SS175M:
    • 1 kW with a maximum depth of 457 m (1500')
    • Medium Frequency: 85 kHz to 135 kHz
    • 16° to 11° beamwidth
    • 50 kHz of total bandwidth from one transducer
    • Medium frequency provides excellent shallow to mid-depth performance, bottom detail and fish target separation
  • SS175HW:
    • 1 kW with a maximum depth of 152 m (500')
    • High Frequency: 150 kHz to 250 kHz
    • Constant 25° beamwidth
    • 100 kHz of total bandwidth from one transducer
    • Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
    • High frequency provides superior shallow water performance, bottom detail and fish target separation
    • High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
  • High performance, low-profile thru-hull housing provides good resolution at speed when installed properly
  • Stainless steel housing for use on stepped, planing or displacement hulls in fiberglass, wood or metal
  • Recommended boat size: Up to 11 m (36')
  • Exclusive Xducer ID® and XSonic technology

Specifications:

  • Weight: 2.7 kg (6 lb)
  • Hull Deadrise: Up to 24°
  • Acoustic Window: Urethane
  • Hole Size: 98 mm (3-7/8")
  • SS175L: Seven internal broadband ceramic assemblies
  • SS175M & SS175HW: One internal ceramic assembly

1 kW

Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles

SS175L Models:

The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The SS175L transducer delivers up to 20 kHz of total bandwidth in just one installation and delivers tremendous deep water performance.

The SS175L transmits across the following bandwidth:

  • Low Frequency 40 to 60 kHz

SS175M Models:

Medium frequency delivers the right combination between coverage under the boat, extended depth range and the ability to produce clean and accurate target and structure returns in the mid to deeper water depths. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths (up to 1500') and delivers ultra-clear target resolution.

The SS175M transmits across the following bandwidth:

  • Medium Frequency 85 kHz to 135 kHz

SS175HW Models

Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.

The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.

The SS175HW transmits across the following bandwidth:

  • High Frequency 150 to 250 kHz

Tilted Elements

Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.

The SS175 range is available in three Tilted Element™ models for each type:

  • Fixed 20° tilted version for 16° to 24° hull deadrise
  • Fixed 12° tilted version for 8° to 15° hull deadrise
  • Fixed 0° tilted version for 0° to 7° hull deadrise

Features:

  • Depth and fast-response water-temperature sensor
  • SS175L:
    • 1 kW power with a maxumum depth of 762m (2500')
    • Low Frequency: 40 kHz to 60 kHz
    • 32° to 21° beamwidth
    • Great deep water performance
  • SS175M:
    • 1 kW with a maximum depth of 457 m (1500')
    • Medium Frequency: 85 kHz to 135 kHz
    • 16° to 11° beamwidth
    • 50 kHz of total bandwidth from one transducer
    • Medium frequency provides excellent shallow to mid-depth performance, bottom detail and fish target separation
  • SS175HW:
    • 1 kW with a maximum depth of 152 m (500')
    • High Frequency: 150 kHz to 250 kHz
    • Constant 25° beamwidth
    • 100 kHz of total bandwidth from one transducer
    • Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
    • High frequency provides superior shallow water performance, bottom detail and fish target separation
    • High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
  • High performance, low-profile thru-hull housing provides good resolution at speed when installed properly
  • Stainless steel housing for use on stepped, planing or displacement hulls in fiberglass, wood or metal
  • Recommended boat size: Up to 11 m (36')
  • Exclusive Xducer ID® and XSonic technology

Specifications:

  • Weight: 2.7 kg (6 lb)
  • Hull Deadrise: Up to 24°
  • Acoustic Window: Urethane
  • Hole Size: 98 mm (3-7/8")
  • SS175L: Seven internal broadband ceramic assemblies
  • SS175M & SS175HW: One internal ceramic assembly
Picture of XSONIC Airmar SS175L (0°)
XSONIC Airmar SS175L (0°)
XSONIC SS175L 0 degree Low CHIRP through hull transducer. Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA039013
Manufacturer part number: 000-13774-001
฿83,265.00 incl VAT
Picture of XSONIC Airmar SS175L (12°)
XSONIC Airmar SS175L (12°)
XSONIC SS175L 12 degree Low CHIRP through hull transducer. Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA039014
Manufacturer part number: 000-13775-001
฿83,265.00 incl VAT
Picture of XSONIC Airmar SS175L (20°)
XSONIC Airmar SS175L (20°)
XSONIC SS175L 20 degree Low CHIRP through hull transducer. Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA039015
Manufacturer part number: 000-13776-001
฿83,265.00 incl VAT
Picture of XSONIC Airmar SS175M (0°)
XSONIC Airmar SS175M (0°)
XSONIC SS175M 0 degree Medium CHIRP through hull transducer. Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA039001
Manufacturer part number: 000-13777-001
฿69,010.00 incl VAT
Picture of XSONIC Airmar SS175M (12°)
XSONIC Airmar SS175M (12°)
XSONIC SS175M 12 degree Medium CHIRP through hull transdcuer. Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA039002
Manufacturer part number: 000-13778-001
฿69,010.00 incl VAT
Picture of XSONIC Airmar SS175M (20°)
XSONIC Airmar SS175M (20°)
XSONIC SS175M 20 degree Medium CHIRP through hull transdcuer. Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA039003
Manufacturer part number: 000-13779-001
฿69,010.00 incl VAT
Picture of XSONIC Airmar SS175H-W (0°)
XSONIC Airmar SS175H-W (0°)
XSONIC SS175H-W/0 Stainless Steel 0 Degree: Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA032494
Manufacturer part number: 000-13780-001
฿84,397.00 incl VAT
Picture of XSONIC Airmar SS175H-W (12°)
XSONIC Airmar SS175H-W (12°)
XSONIC SS175H-W/12 Stainless Steel 12 Degree: Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA032495
Manufacturer part number: 000-13781-001
฿84,397.00 incl VAT
Picture of XSONIC Airmar SS175H-W (20°)
XSONIC Airmar SS175H-W (20°)
XSONIC SS175H-W/20 Stainless Steel 20 Degree: Black 9 pin connector: Cable length 10 m (33.0 ft)
SKU: ITA032496
Manufacturer part number: 000-13782-001
฿84,397.00 incl VAT